RecallPlainVehicle recalls, explained in plain English

2015 BMW M3 recalls & complaints

3 high-risk recalls and 4 owner complaints. Check every recall is completed before buying.
3recalls
3high risk
0stop-driving
4complaints

Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.

3 safety recalls, most serious first

High risk Campaign 16V653000 · announced 09/09/2016 (10 years ago)

1. Body / structure

What's wrong, in plain English: Body panels, frame, doors, hood, trunk or latches. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.

What could happen: Loose rear sub-frame bolts may adversely affect vehicle handling and control, increasing the risk of a crash.

The fix: BMW will notify owners, and dealers will replace the rear sub-frame bolts with new bolts, free of charge. The recall began on November 3, 2016. Owners may contact BMW customer service at 1-800-525-7417.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2015 M3.
  2. Book a repair at any authorized BMW dealer. Quote NHTSA campaign 16V653000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-525-7417.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STRUCTURE:FRAME AND MEMBERS
Summary: BMW North America, LLC (BMW) is recalling certain model year 2016 BMW M2 Coupe vehicles, 2015-2017 M3 Sedan vehicles and 2015-2016 M4 Coupe and M4 Convertible vehicles. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.
Consequence: Loose rear sub-frame bolts may adversely affect vehicle handling and control, increasing the risk of a crash.
Remedy: BMW will notify owners, and dealers will replace the rear sub-frame bolts with new bolts, free of charge. The recall began on November 3, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 15V782000 · announced 23/11/2015 (9 years ago)

2. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The affected vehicles have a driveshaft with a slip-joint that may not have been filled with grease. As a result, the slip-joint may fail over time.

What could happen: If the slip-joint fails, there would be a loss of power to the rear axle and therefore the vehicle would stop moving, increasing the risk of a crash.

The fix: BMW will notify owners, and dealers will inspect the driveshaft, replacing it as necessary, free of charge. The recall began on January 14, 2016. Owners may contact BMW customer service at 1-800-525-7417.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2015 M3.
  2. Book a repair at any authorized BMW dealer. Quote NHTSA campaign 15V782000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-525-7417.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: POWER TRAIN:DRIVELINE:DRIVESHAFT
Summary: BMW of North America, LLC (BMW) is recalling certain model year 2015-2016 M3 Sedan vehicles manufactured May 30, 2015, to September 2, 2015, 2016 M4 Coupe vehicles manufactured July 3, 2015, to September 11, 2015, and 2015-2016 M4 Convertible vehicles manufactured May 29, 2015, to August 4, 2015. The affected vehicles have a driveshaft with a slip-joint that may not have been filled with grease. As a result, the slip-joint may fail over time.
Consequence: If the slip-joint fails, there would be a loss of power to the rear axle and therefore the vehicle would stop moving, increasing the risk of a crash.
Remedy: BMW will notify owners, and dealers will inspect the driveshaft, replacing it as necessary, free of charge. The recall began on January 14, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 24V288000 · announced 24/04/2024 (10 months ago)

3. Airbags

What's wrong, in plain English: The airbag system — the part that is supposed to protect you in a crash. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.

What could happen: An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.

The fix: Dealers will replace the head air bags, free of charge. Owner notification letters were mailed November 4, 2024. Owners may contact BMW customer service at 1-800-525-7417.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2015 M3.
  2. Book a repair at any authorized BMW dealer. Quote NHTSA campaign 24V288000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-525-7417.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: AIR BAGS:SIDE/WINDOW
Summary: BMW of North America, LLC (BMW) is recalling certain 2014-2015 2 Series Coupe (228i, 228i xDrive, M235i), 3 Series Sedan (320i, 320i xDrive, 328i, 328i xDrive, 335i, 335i xDrive, M3, 328d, 328d xDrive), 4 Series Coupe (428i, 428i xDrive, 435i, 435i xDrive, M4), and 2015 4 Series Gran Coupe (428i, 428i xDrive, 435i, 435i xDrive) vehicles. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.
Consequence: An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.
Remedy: Dealers will replace the head air bags, free of charge. Owner notification letters were mailed November 4, 2024. Owners may contact BMW customer service at 1-800-525-7417.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Useful for owners

Links go to Amazon. We may earn a small commission at no cost to you.

Owner complaints filed with NHTSA

4complaints
0crashes
0fires
0injuries
0deaths

Most complained-about parts: Fuel system (2), Unknown Or Other (1), Engine (1).

Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.

Read recent complaints (4)

05/14/2022 · Fuel system
Gas tank has a significant leak. This allows for the opportunity to ignite the car putting all persons lives in danger, and effects emissions. Problem has been confirmed by independent Indy shop technician

05/14/2022 · Fuel system
Fuel tank top weld has failed, and is actively leaking fuel. This is likely to cause ignition of the vehicle during use and poses a threat to the lives of passengers and other drivers on the road as well as emissions failure. The failed weld was confirmed by independent Bmw technician. This part is a known failure point, and emission extended warrantee has…

07/28/2020 · Unknown Or Other
REAR VIEW CAMERA STOPPED WORKING, SCREEN DISPLAYS "NO SIGNAL". FUSE DID NOT BLOW.

12/18/2019 · Engine
CRANK HUB SPUN TIMING SPROCKET CAUSING VALVES TO IMPACT PISTON AND CATASTROPHIC ENGINE FAILURE. QUOTED MORE THAN $10K OUT OF POCKET TO REPAIR. THIS IS CAUSED DUE TO POOR CRANK HUB DESIGN. CAR COMPANIES HAVE BEEN USING KEYED CRANKHUBS FOR GENERATIONS BUT BMW DECIDED TO NOT USED A KEYED HUB.. THIS IS VERY NEGLIGENT CONSIDERING HOW MANY OF THESE VEHICLES HAVE…

Compare

2012 M32013 M32014 M32016 M32017 M32018 M32015 435i Xdrive2015 X1 Sdrive28i2015 X1 Xdrive28i2015 X1 Xdrive35i2015 X3 Sdrive28i2015 X3 Xdrive28d2015 X3 Xdrive28i2015 X3 Xdrive35i2015 X4 Xdrive28i2015 X4 Xdrive35i2015 X5 Sdrive35i2015 X5 Xdrive35d