1990 Buick Century recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-20. Recalls apply to specific VINs — run your VIN to confirm.
2 safety recalls, most serious first
1. Seat belts
What's wrong, in plain English: Seat belts may not hold you in a crash. THESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, "SEAT BELT ASSEMBLY ANCHORAGES."
What could happen: CONSEQUENCE OF NON-COMPLIANCE: IN A COLLISON, STRESS CAN CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY OF THE VEHICLE. THE SAFETY BELT MAY NOT PROTECT AN OCCUPANT IN THE EVENT OF A VEHICLE CRASH.
The fix: DEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH A NEW SHOULDER BOLT AND THREAD LOCKING ADHESIVE. ADDITIONALLY, NOISE CONTROL PATCHES WILL BE APPLIED AT EACH ANCHORAGE.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 1990 CENTURY.
- Book a repair at any authorized Buick dealer. Quote NHTSA campaign 95V173000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: SEAT BELTS:FRONT:ANCHORAGE
Summary: THESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, "SEAT BELT ASSEMBLY ANCHORAGES."
Consequence: CONSEQUENCE OF NON-COMPLIANCE: IN A COLLISON, STRESS CAN CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY OF THE VEHICLE. THE SAFETY BELT MAY NOT PROTECT AN OCCUPANT IN THE EVENT OF A VEHICLE CRASH.
Remedy: DEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH A NEW SHOULDER BOLT AND THREAD LOCKING ADHESIVE. ADDITIONALLY, NOISE CONTROL PATCHES WILL BE APPLIED AT EACH ANCHORAGE.
Notes: SYSTEM: INTERIOR; ACTIVE RESTRAINTS; BELT ANCHOR AND ATTACHMENT; FMVSS NO.210. VEHICLE DESCRIPTION: PASSENGER VEHICLES. NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300; CHEVROLET AT 1-800-222-1020; PONTIAC AT 1-800-762-2737; OR OLDSMOBILE AT 1-800-442-6537. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
2. Seats
What's wrong, in plain English: Seat frames, adjusters or child-seat anchors. THE POWER SEAT OR RECLINER WIRING HARNESS CAN BE PINCHED OR CAN CHAFE ON THE SEAT FRAME OR SPRING SUPPORT ROD, WEARING THROUGH THE WIRE INSULATION AND CAUSING AN ELECTRICAL SHORT.
What could happen: THE HIGH CURRENT CAUSED BY THE ELECTRICAL SHORT WELDS THECIRCUIT BREAKER ELEMENTS TOGETHER IN THE CLOSED POSITION, LEAVING THE CIRCUITUNPROTECTED AND GENERATING SUFFICIENT HEAT TO BURN THE WIRE INSULATION ANDIGNITE THE SEAT CUSHION MATERIAL.
The fix: REPAIR ANY ABRADED WIRING AND REROUTE THE WIRING HARNESS USING A WIRING HARNESS CLIP.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 1990 CENTURY.
- Book a repair at any authorized Buick dealer. Quote NHTSA campaign 92V124000.
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: SEATS:FRONT ASSEMBLY:RECLINER
Summary: THE POWER SEAT OR RECLINER WIRING HARNESS CAN BE PINCHED OR CAN CHAFE ON THE SEAT FRAME OR SPRING SUPPORT ROD, WEARING THROUGH THE WIRE INSULATION AND CAUSING AN ELECTRICAL SHORT.
Consequence: THE HIGH CURRENT CAUSED BY THE ELECTRICAL SHORT WELDS THECIRCUIT BREAKER ELEMENTS TOGETHER IN THE CLOSED POSITION, LEAVING THE CIRCUITUNPROTECTED AND GENERATING SUFFICIENT HEAT TO BURN THE WIRE INSULATION ANDIGNITE THE SEAT CUSHION MATERIAL.
Remedy: REPAIR ANY ABRADED WIRING AND REROUTE THE WIRING HARNESS USING A WIRING HARNESS CLIP.
Notes: SYSTEM: INTERIOR: SEATING.VEHICLE DESCRIPTION: PASSENGER CARS WITH 6 WAY POWER SEATS OR POWER RECLINERS.
Useful for owners
- OBD2 code reader — see what the car's computer is reporting
- Compact car fire extinguisher
- 1990 Buick Century owner's manual
Owner complaints filed with NHTSA
Most complained-about parts: Electrical system (9), Seat belts (8), Engine (7), Body / structure (6), Seats (6).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
11/05/2003 · Steering
PROBLEMS WITH VEHICLE'S STEERING.*MR STIFFNESS IN STEERING, SOMETIMES CONSUMER HAVE TO STEER IN NEUTRAL AS IT DOESN'T COME BACK BY ITSELF. SOMETIMES IT SQUEAK WHILE TURNING, NO LOCK UP HAS OCCURRED YET. *PH
10/11/2002 · Engine · fire
CONSUMER STATES THAT WHILE DRIVING AND WITHOUT WARNING THE ENGINE BLEW AND THE VEHICLE STARTED TO SMOKE UNDER THE HOOD CAUSING THE CONSUMER TO PULL OVER. DEALER NOTIFIED. MR
08/07/2002 · Body / structure
ON WEDNESDAY 6/13/2002 MY 1990 BUICK CENTURY LOST STEERING CONTROL DUE TO A FAILURE IN THE CRADLE BOLTS.I COULD HAVE BEEN SERIOUSLY INJURED.I HAVE FOUND THE FOLLOWING RECALL WHICH INCLUDES THE 1990 BUICK REGAL, NHTSA RECALL NO. 97V058/GM RECALL NO. 97016. MY VEHICLE IS A 1990 BUICK CENTURY WITH 3300 V6 AND IS NOT LISTED IN THIS RECALL.I BELIEVE THE CRADLE B…
04/25/2002 · Electrical system
CIRCUIT BREAKER FOR SEAT IN FUSE COMPARTMENT OVERHEATED, CAUSING POWER SEATS AND POWER DOOR TO BE INOPERATIVE. DRIVER IS UNABLE TO REPLACE FUSE BECAUSE IT WAS SO HOT, IT BURNED. *AK. CONSUMER STATES WHEN HE TOUCHED THE CORRECT FUSE HE WAS BURNED LEAVING A BLISTER ON HIS FINGER AND THUMB, CONSUMER STATES HE DISCOVERED THERE WAS A RECALL, HOWEVER THE DEALER K…
07/14/2001 · Body / structure
WHILE DRIVING DOWN THE HIGHWAY, I NOTICED THAT THE FRONT OF CAR LURCHED AND THE STEERING WHEEL POSITION CHANGED. PULLED CAR TO SIDE AND SAW THAT PART OF FRAME WAS HANGING DOWN. TOOK TO DEALER WHO SAID THAT THE CRADLE BOLT HAD PULLED THROUGH THE SUPPORT AND WAS HANGING DOWN. WHY WASN'T MY CAR ON THE RECALL CAMPAIGN AS THE REGAL WAS? I AM AFRAID THAT THE…
02/08/2001 · Engine
MOTOR FELL TO GROUND WHILE PULLING OUT. THIS DAMAGED STEERING AND CAR WAS OUT OF CONTROL. *AK
05/30/2000 · Visibility (wipers / glass)
NONE OF THE POWER WINDOWS WOULD OPEN OR CLOSE. VEHICLE WAS TAKEN TO DEALERSHIP. TWO BROKEN WIRES WERE RECONNECTED AT OWNER'S EXPENSE. PLEASE PROVIDE ANY FURTHER INFORMATION. *AK
05/23/2000 · Steering
WHILE DRIVING ON ROAD NOTICED VEHICLE PULLING A SHARP LEFT. LOOKED AT THE CRADLES, AND THE RETAINER WASHER BROKE/WAS RUSTED THROUGH. REPLACED IT. ALSO, OTHERS NEEDED TO BE REPLACED. IN ADDITION, RACK & PINION STEERING ASSEMBLY IS CONNECTED TO ENGINE CRADLE FRAME AND THE STEERING SHAFT, DROPPED. THIS MAY CAUSE ERRATIC STEERING PROBLEMS. *AK