2024 Ford Edge recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.
2 safety recalls, most serious first
1. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
What could happen: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
The fix: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed o…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2024 EDGE.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 25V315000 (manufacturer code 25S49).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
2. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
What could happen: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
The fix: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recal…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2024 EDGE.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 26V124000 (manufacturer code 26S09).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes:
Useful for owners
Owner complaints filed with NHTSA
Most complained-about parts: Unknown Or Other (9), Electrical system (8), Backup camera (7), Transmission / drivetrain (5), Airbags (3).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
09/17/2026 · Unknown Or Other
Air compressor for air conditioning died with only 37,000 miles and less than 3 year old Ford Edge. Costing me $2200 for new compressor and labor at Rocky Top Ford in [XXX]. Reason out of warranty car was sold in XXX. So passed the 3 years warranty. Looks like others have had this problem. Any help would be appreciated. Thanks INFORMATION REDACTED PURSUANT…
09/15/2026 · Electrical system
The rear camera is having a glitch/ dark mode and is unable to fully inspect for any safety concerns despite myself checking my surroundings. It poses a hazard because it can cause myself to damage the car when I’m trying to reverse the car to park and I can accidentally hit an animal, a structure, or a child who is on my blind spot since the camera is unab…
07/20/2026 · Unknown Or Other
Vehicle Information Year: 2024 Make: Ford Model: Edge VIN: [XXX] Description of the Safety Issue I am submitting this complaint regarding the unexpected failure of the panoramic glass roof on my 2024 Ford Edge. The vehicle was parked in my residential driveway. As I began backing out of the driveway, I heard a very loud explosion or bang. I immediately…
06/30/2026 · Transmission / drivetrain
Vehicle shudders especially under 40mph. Dealer advised that the torque converter is bad.
06/26/2026 · Backup camera
The contact owns a 2024 Ford Edge. The contact received notification of NHTSA Campaign Number: 26V124000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted, and a software update was performed but the issue persisted. The contact stated that the manufacturer had exceeded a reasonable amoun…
06/12/2026 · Electrical system
The contact owns a 2024 Ford Edge. The contact stated that while driving at an undisclosed speed, the engine seized. In addition, the instrument cluster displayed a black screen with several unknown warning lights illuminated. The contact stated that while attempting to start the vehicle, the vehicle started. The vehicle was driven to the residence. The veh…
04/28/2026 · Backup camera
The contact owns a 2024 Ford Edge. The contact stated that while attempting to reverse, the rearview camera became inoperable. The rearview camera image failed to function properly. The failure was intermittent. The contact received notification of NHTSA Campaign Number: 26V124000 (Back Over Prevention); however, the part to do the recall repair was not yet…
04/20/2026 · Backup camera · crash
The contact owns a 2024 Ford Edge. The contact stated that while the contact's daughter was reversing, the rear-view camera seized. The contact's vehicle crashed into a vehicle that was parked behind the contact's vehicle. No injuries. In addition, the contact stated that the rear-view camera displayed a frozen image. The contact stated that the failure was…