RecallPlainVehicle recalls, explained in plain English

2021 Infiniti Q50 recalls & complaints

3 high-risk recalls and 6 owner complaints. Check every recall is completed before buying.
3recalls
3high risk
0stop-driving
6complaints

Source: NHTSA, updated daily. Last checked 2026-10-19. Recalls apply to specific VINs — run your VIN to confirm.

3 safety recalls, most serious first

High risk Campaign 21V402000 · announced 27/05/2021 (3 years ago)

1. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The front steering knuckle or rear axle housing may have insufficient strength due to improper heat-treatment.

What could happen: The steering knuckle or rear axle could deform upon impact, such as from hitting a curb, resulting in a loss of steering control, or possible wheel separation. Both of these conditions can increase the risk of a crash.

The fix: Dealers will inspect and replace the front steering knuckle and rear axle housing, as necessary, free of charge. Owner notification letters were mailed July 26, 2021. Nissan owners may contact customer service at 1-800-867-7669. INFINITI owners may contact customer service at 1-800-662-6200.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2021 Q50.
  2. Book a repair at any authorized Infiniti dealer. Quote NHTSA campaign 21V402000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-867-7669.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: SUSPENSION:REAR:AXLE:SPINDLE
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2020 Nissan Murano, INFINITI QX60, 2021 Nissan GT-R, INFINITI QX50, and Q50 vehicles. The front steering knuckle or rear axle housing may have insufficient strength due to improper heat-treatment.
Consequence: The steering knuckle or rear axle could deform upon impact, such as from hitting a curb, resulting in a loss of steering control, or possible wheel separation. Both of these conditions can increase the risk of a crash.
Remedy: Dealers will inspect and replace the front steering knuckle and rear axle housing, as necessary, free of charge. Owner notification letters were mailed July 26, 2021. Nissan owners may contact customer service at 1-800-867-7669. INFINITI owners may contact customer service at 1-800-662-6200.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

High risk Campaign 21V599000 · announced 02/08/2021 (5 years ago)

2. Backup camera

What's wrong, in plain English: The rear camera may not show an image when reversing. A software error may deactivate the audio/video control unit screen, preventing the rear-view image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

What could happen: A rear-view camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.

The fix: Dealers will update the control unit software, free of charge. Owner notification letters were mailed September 14, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is R21A9.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2021 Q50.
  2. Book a repair at any authorized Infiniti dealer. Quote NHTSA campaign 21V599000 (manufacturer code R21A9).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-867-7669.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: BACK OVER PREVENTION:DISPLAY FUNCTION
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2021 Infinity Q50, Q60, and QX80 vehicles. A software error may deactivate the audio/video control unit screen, preventing the rear-view image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rear-view camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will update the control unit software, free of charge. Owner notification letters were mailed September 14, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is R21A9.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

High risk Campaign 21V234000 · announced 04/04/2021 (5 years ago)

3. Engine

What's wrong, in plain English: Engine problems range from stalling to fire. After detecting rapid acceleration, the Engine Control Module (ECM) may incorrectly reduce engine power and reduce fuel supply to the engine.

What could happen: A lack of fuel may cause an engine stall, increasing the risk of a crash.

The fix: INFINITI will notify owners, and dealers will reprogram the ECM software, free of charge. The recall began on May 25, 2021. Owners may contact INFINITI customer service at 1-800-662-6200. INFINITI's number for this recall is R20C5.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2021 Q50.
  2. Book a repair at any authorized Infiniti dealer. Quote NHTSA campaign 21V234000 (manufacturer code R20C5).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-662-6200.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
Summary: Nissan North America, Inc. (INFINITI) is recalling certain 2021 INFINITI Q50 and Q60 vehicles. After detecting rapid acceleration, the Engine Control Module (ECM) may incorrectly reduce engine power and reduce fuel supply to the engine.
Consequence: A lack of fuel may cause an engine stall, increasing the risk of a crash.
Remedy: INFINITI will notify owners, and dealers will reprogram the ECM software, free of charge. The recall began on May 25, 2021. Owners may contact INFINITI customer service at 1-800-662-6200. INFINITI's number for this recall is R20C5.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Useful for owners

Links go to Amazon. We may earn a small commission at no cost to you.

Owner complaints filed with NHTSA

6complaints
1crashes
0fires
0injuries
0deaths

Most complained-about parts: Vehicle Speed Control (2), Engine (2), Transmission / drivetrain (1), Wheels / tires (1), Airbags (1).

Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.

Read recent complaints (6)

09/21/2026 · Transmission / drivetrain
In August 2026, while driving, the vehicle suddenly lost acceleration and engine power and would only travel at a very slow speed. The check engine light came on. The driver had to safely stop, turn the engine off, and restart it. After restarting, the vehicle temporarily regained acceleration and normal speed. This problem has occurred more than once and c…

09/08/2026 · Engine
The contact owns a 2021 Infiniti Q50. The contact stated that while driving approximately 70 - 80 MPH and attempting to accelerate, the vehicle would accelerate but failed to exceed 10 MPH. The accelerator pedal had to be depressed to the floorboard for the vehicle to accelerate; however, the vehicle still failed to exceed 10 MPH. During the failure, the c…

02/09/2026 · Wheels / tires
The contact owns a 2021 Infinity Q50. The contact stated that the vehicle was recently purchased from a dealer. When the vehicle was purchased, the tires were replaced. The vehicle was later taken to the dealer for maintenance, and while at the dealer, the contact was informed that there were nails in the tires and that the tires needed to be replaced. The…

08/09/2024 · Airbags
The contact owns a 2021 Infiniti Q50. The contact stated that while driving at undisclosed speeds, the air bag warning light illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact called an independent mechanic, but no assistance was provided. The manufacturer was not contacted. The failure mileage was approx…

01/06/2024 · Body / structure
I was driving home on the Veterans Expressway in Tampa traveling about 65 mph when a sound like a gunshot almost caused me to lose control as I swerved out of fear - thankfully no other vehicles were nearby. I pulled over at the next exit in a public place and discovered my sunroof class had a piece of glass missing and it looked like it was pushed upwards.…

04/10/2022 · Vehicle Speed Control · crash
I purchased a new 2021 Infiniti Q50 from Infiniti of Cool Springs on September 28, 2020. There was an incident on January 13, 2022 due to a manufacturer defect that caused my car to accelerate on it’s own. I was parked at a car wash to vacuum my vehicle. I had my foot on the brake to move the gear shift into park when my car rapidly accelerated which caused…

Compare

2018 Q502019 Q502020 Q502022 Q502023 Q502024 Q502021 Qx802021 Qx502021 Q60