RecallPlainVehicle recalls, explained in plain English

2018 RAM 5500 recalls & complaints

8 high-risk recalls and 38 owner complaints. Check every recall is completed before buying.
8recalls
8high risk
0stop-driving
38complaints

Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.

8 safety recalls, most serious first

High risk Campaign 19V359000 · announced 13/05/2019 (6 years ago)

1. Brakes

What's wrong, in plain English: Anything that slows the car down. Treat brake recalls as urgent. Unruh Fire, Inc. (Unruh Fire) is recalling one 2018 Dodge 5500-based fire truck equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.

What could happen: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.

The fix: Unruh Fire has notified the owner and will provide replacement brake lights, free of charge. The recall began May 20, 2019. Owners may contact Unruh Fire customer service at 1-800-856-7080.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 19V359000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-856-7080.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: EXTERIOR LIGHTING:BRAKE LIGHTS
Summary: Unruh Fire, Inc. (Unruh Fire) is recalling one 2018 Dodge 5500-based fire truck equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.
Consequence: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Remedy: Unruh Fire has notified the owner and will provide replacement brake lights, free of charge. The recall began May 20, 2019. Owners may contact Unruh Fire customer service at 1-800-856-7080.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V277000 · announced 01/05/2018 (8 years ago)

2. Brakes

What's wrong, in plain English: Anything that slows the car down. Treat brake recalls as urgent. The primary and secondary brake hoses located between the brake master cylinder and the hydraulic control unit may have been manufactured without anti-corrosion plating on the ferrules, which can allow the ferrules to corrode.

What could happen: If the ferrules corrode, the brake fluid may leak and cause a loss of braking, increasing the risk of a crash.

The fix: Chrysler will notify owners, and dealers will inspect the brake hoses and replace them if necessary, free of charge. The recall began June 19, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U41.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 18V277000 (manufacturer code U41).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Summary: Chrysler (FCA US LLC) is recalling certain 2018 RAM 4500 and 5500 cab chassis trucks. The primary and secondary brake hoses located between the brake master cylinder and the hydraulic control unit may have been manufactured without anti-corrosion plating on the ferrules, which can allow the ferrules to corrode.
Consequence: If the ferrules corrode, the brake fluid may leak and cause a loss of braking, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the brake hoses and replace them if necessary, free of charge. The recall began June 19, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U41.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V332000 · announced 17/05/2018 (7 years ago)

3. Electrical system

What's wrong, in plain English: Wiring, modules, batteries. Short circuits can cause stalls or fires. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed…

What could happen: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

The fix: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 18V332000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: ELECTRICAL SYSTEM:WIRING
Summary: Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 19V255000 · announced 28/03/2019 (5 years ago)

4. Brakes

What's wrong, in plain English: Anything that slows the car down. Treat brake recalls as urgent. Blanchat Mfg., Inc. (Blanchat) is recalling one 2018 B-27 Minuteman vehicle built on a RAM 5500 chassis and equipped with Whelen brake lights recalled under 18E-063. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.

What could happen: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.

The fix: Blanchat has notified the owner, and will replace the brake lights, free of charge. The recall began March 27, 2019. Owners may contact Blanchat customer service at 1-620-896-7145.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 19V255000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-620-896-7145.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: EXTERIOR LIGHTING:BRAKE LIGHTS
Summary: Blanchat Mfg., Inc. (Blanchat) is recalling one 2018 B-27 Minuteman vehicle built on a RAM 5500 chassis and equipped with Whelen brake lights recalled under 18E-063. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.
Consequence: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Remedy: Blanchat has notified the owner, and will replace the brake lights, free of charge. The recall began March 27, 2019. Owners may contact Blanchat customer service at 1-620-896-7145.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 21V398000 · announced 27/05/2021 (3 years ago)

5. Wheels / tires

What's wrong, in plain English: A wheel or tire can fail while driving. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.

What could happen: Wheel separation can cause a vehicle crash.

The fix: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 21V398000 (manufacturer code Y26 and Y36).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: WHEELS:LUGS/NUTS/BOLTS/STUDS
Summary: Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Consequence: Wheel separation can cause a vehicle crash.
Remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

High risk Campaign 18V100000 · announced 08/02/2018 (8 years ago)

6. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

What could happen: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

The fix: Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 18V100000 (manufacturer code U11).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: POWER TRAIN:AUTOMATIC TRANSMISSION
Summary: Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Consequence: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 17V824000 · announced 21/12/2017 (8 years ago)

7. Equipment

What's wrong, in plain English: A part or accessory supplied with the vehicle. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the pro…

What could happen: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.

The fix: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 17V824000 (manufacturer code T82).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: EQUIPMENT
Summary: Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 24V896000 · announced 27/11/2024 (7 months ago)

8. Brakes

What's wrong, in plain English: Anything that slows the car down. Treat brake recalls as urgent. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.

What could happen: A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.

The fix: Dealers will replace the brake HCU, or replace the HCU motor, free of charge. Owner notification letters were mailed beginning January 9, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is C4B.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 5500.
  2. Book a repair at any authorized RAM dealer. Quote NHTSA campaign 24V896000 (manufacturer code C4B).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
Summary: Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.
Consequence: A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.
Remedy: Dealers will replace the brake HCU, or replace the HCU motor, free of charge. Owner notification letters were mailed beginning January 9, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is C4B.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.

Useful for owners

Links go to Amazon. We may earn a small commission at no cost to you.

Owner complaints filed with NHTSA

38complaints
1crashes
0fires
0injuries
0deaths

Most complained-about parts: Brakes (25), Hydraulic (13), Wheels / tires (5), Vehicle Speed Control (4), Transmission / drivetrain (4).

Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.

Read recent complaints (8)

09/18/2026 · Brakes
The contact owns a 2018 Ram 5500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted and confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for…

07/28/2026 · Brakes
Subject: Complaint Regarding Delayed Safety Recall Repair – 2018 Ram 5500 (Recall C4B / NHTSA Recall 24V-896) I own a 2018 Ram 5500 Chassis Cab, VIN [XXX]. My truck is subject to Safety Recall C4B (NHTSA Recall 24V-896) involving the ABS Hydraulic Control Unit (HCU). I have attempted to have this safety recall completed, but the repair has been delayed be…

07/27/2026 · Brakes
The contact owns a 2018 Ram 5500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the ABS warning light was intermittent…

05/07/2026 · Brakes
recall C4B hydraulic control unit still not addressed as of may 7 2026 recall received on

05/04/2026 · Suspension
Ref NHTSA 24v-896, Recall C4B The problem started back in 2021 when the anti-lock brake Hydraulic Control Unit failed. It was replaces and then it failed again in Dec 2024 while on vacation. When returning home in Jan 2025, the truck was brought to the dealer for repair. It was found to have failed again and told that a repair parts were not available, nor…

04/29/2026 · Brakes
The contact owns a 2018 Ram 5500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed…

04/08/2026 · Brakes
The contact owns a 2018 Ram 5500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed…

01/27/2026 · Brakes
The contact owns a 2018 Ram 5500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brake, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, a warning chime activated continuously. The ABS and Brake warning lights were illuminated. The local deal…

Compare

2015 55002016 55002017 55002019 55002020 55002021 55002018 15002018 15002018 15002018 15002018 15002018 25002018 25002018 25002018 25002018 25002018 25002018 Promaster City