2025 Toyota Tundra recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-19. Recalls apply to specific VINs — run your VIN to confirm.
5 safety recalls, most serious first
1. Lights
What's wrong, in plain English: Headlights, tail lights or turn signals may not work, making the car hard to see. Moisture may enter the reverse light assemblies and cause a light failure.
What could happen: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
The fix: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2025 TUNDRA.
- Book a repair at any authorized Toyota dealer. Quote NHTSA campaign 25V322000 (manufacturer code 24TB06 and 24TA06).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-331-4331.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: EXTERIOR LIGHTING:BACK UP LIGHTS
Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Consequence: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
Notes:
2. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
What could happen: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
The fix: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2025 TUNDRA.
- Book a repair at any authorized Toyota dealer. Quote NHTSA campaign 25V657000 (manufacturer code 25TB10 and 25TA10).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-331-4331.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Notes:
3. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
What could happen: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
The fix: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2025 TUNDRA.
- Book a repair at any authorized Toyota dealer. Quote NHTSA campaign 26V038000 (manufacturer code 26TB02 and 26TA02).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-331-4331.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION:SOFTWARE
Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
Notes:
4. Equipment
What's wrong, in plain English: A part or accessory supplied with the vehicle. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
What could happen: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
The fix: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2025 TUNDRA.
- Book a repair at any authorized Toyota dealer. Quote NHTSA campaign 26V179000 (manufacturer code 26LB04, 26LA04, 26TB07, and 26TA07).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-331-4331.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: EQUIPMENT:OTHER:LABELS
Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Notes:
5. Equipment
What's wrong, in plain English: A part or accessory supplied with the vehicle. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
What could happen: A vehicle with an incorrect maximum capacity weight value may be overloaded, increasing the risk of a crash.
The fix: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 18, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2025 TUNDRA.
- Book a repair at any authorized Toyota dealer. Quote NHTSA campaign 26V571000 (manufacturer code 26TA18).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-331-4331.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: EQUIPMENT:OTHER:LABELS
Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Toyota Tacoma Hybrid, 2025 Tundra Hybrid, Tundra, 2026 RAV4 Hybrid, 4Runner i-Force Max Hybrid, and 4Runner vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, increasing the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 18, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.
Notes:
Useful for owners
Owner complaints filed with NHTSA
Most complained-about parts: Engine (47), Transmission / drivetrain (36), Fuel system (26), Vehicle Speed Control (21), Unknown Or Other (17).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
10/13/2026 · Unknown Or Other
Subject: Safety Complaint – 2025 Toyota Tundra – Sudden Acceleration Delay – T-SB-0032-26 – Two Near-Accidents. I am the owner of a 2025 Toyota Tundra and am filing this complaint to report a serious safety concern involving delayed acceleration from a stop or near-stop condition. My vehicle has experienced this problem on two separate occasions. When I att…
10/07/2026 · Transmission / drivetrain
Mutplie times am have a delay on the accrelations have taken it to the dealer to be told thats just how the hybirds are this can cause a crash there should not be a delay when trying to speed up
10/06/2026 · Electrical system
Here's your description, about 1,750 characters, so it fits the 2,000 limit: --- My 2025 Toyota Tundra has two intermittent defects that have not been repaired despite multiple visits to Berglund Toyota in [XXX] 1. Driver's door will not unlock. Intermittently, when I press unlock on the key fob, all doors unlock except the driver's door. I have video sh…
10/05/2026 · Electrical system
Two issues happening at the same time. “Key not detected” and “TPMS System Malfunction”. Key not detected: Happens at various times, either at startup or while driving, an error message that says “Key not detected “ comes on the dash and a loud beeping. My concern is that I may become stranded somewhere if the system cannot detect the key when trying to…
10/04/2026 · Unknown Or Other
Possible issue with the safety of others: My tailgate for my 2025 Tundra crewmax came opened (unknown to me) and contents of my Truck bed dumped onto the road. The incident as it happened. I was backed into a parking spot, truck was off, when I got in my remote was in my pocket and the truck would not start. So I pulled the remote out of my pocket and put i…
09/29/2026 · Body / structure
On 06/02/2026, at approximately 20,000 miles, the driver's front interior door handle on my 2025 Toyota Tundra TRD Pro failed. An internal component connecting the handle to the latch mechanism broke, and the door could not be opened from inside. I was unable to exit the vehicle through the driver's door using the interior handle. I had to lower the window…
09/25/2026 · Seats
The side panel for the seat had cracked and pinched my wife's leg causing a minor injury when she was entering the vehicle.
09/23/2026 · Steering
When using the cruise control and lane keeping system the truck will jerk into oncoming traffic and try to swerve off to turning lanes. I took it to Toyota and they couldn't find any problem. no warning lights or any indication of a problem shows on the dash. At this point the system is unusable. I have seen many post of similar incidents on the internet.