2026 Ford Mustang Mach-E Bev Bev recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-19. Recalls apply to specific VINs — run your VIN to confirm.
5 safety recalls, most serious first
1. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. The cylinder head may have been improperly manufactured, which can cause the ball plugs to fail, resulting in an oil leak.
What could happen: An oil leak in the presence of an ignition source such as hot engine or exhaust components increases the risk of a fire. In addition, the loss of oil can result in engine seizure and loss of motive power, increasing the risk of a crash.
The fix: Dealers will replace the cylinder head assembly, free of charge. All affected vehicles are still within dealership inventory and therefore no owner notification letters will be mailed. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SD3. Vehicle Identification Numbers (VI…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2026 MUSTANG MACH-E BEV BEV.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 25V828000 (manufacturer code 25SD3).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE
Summary: Ford Motor Company (Ford) is recalling certain 2026 Explorer, Mustang, Lincoln Corsair, and 2025 Maverick vehicles. The cylinder head may have been improperly manufactured, which can cause the ball plugs to fail, resulting in an oil leak.
Consequence: An oil leak in the presence of an ignition source such as hot engine or exhaust components increases the risk of a fire. In addition, the loss of oil can result in engine seizure and loss of motive power, increasing the risk of a crash.
Remedy: Dealers will replace the cylinder head assembly, free of charge. All affected vehicles are still within dealership inventory and therefore no owner notification letters will be mailed. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SD3. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on November 24, 2025.
Notes:
2. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. The engine piston circlips may have been incorrectly installed during manufacturing, which can result in piston failure and engine damage, leading to a loss of drive power.
What could happen: An unexpected loss of drive power increases the risk of a crash.
The fix: Dealers will inspect the engine for missing or mis-installed circlips and replace the engine as necessary, free of charge. Owner notification letters were mailed April 10, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S23. Vehicle Identification Numbers (VINs) inv…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2026 MUSTANG MACH-E BEV BEV.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 26V205000 (manufacturer code 26S23).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL
Summary: Ford Motor Company (Ford) is recalling certain 2026 Explorer and Mustang vehicles. The engine piston circlips may have been incorrectly installed during manufacturing, which can result in piston failure and engine damage, leading to a loss of drive power.
Consequence: An unexpected loss of drive power increases the risk of a crash.
Remedy: Dealers will inspect the engine for missing or mis-installed circlips and replace the engine as necessary, free of charge. Owner notification letters were mailed April 10, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S23. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on April 2, 2026.
Notes:
3. Visibility (wipers / glass)
What's wrong, in plain English: You may not be able to see the road clearly. During certain cold temperature conditions, the windshield wipers may function only at their high-speed setting and the washing system may fail to function properly.
What could happen: Windshield wipers or a washing system that fails to function as intended can reduce visibility, increasing the risk of a crash.
The fix: Dealers will inspect and replace the wiper motor as necessary, free of charge. Owner notification letters were mailed August 11, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26C32. Vehicle Identification Numbers (VINs) involved in this recall became searchable on…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2026 MUSTANG MACH-E BEV BEV.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 26V418000 (manufacturer code 26C32).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
Summary: Ford Motor Company (Ford) is recalling certain 2024-2026 Mustang and 2025-2026 Mustang GTD vehicles. During certain cold temperature conditions, the windshield wipers may function only at their high-speed setting and the washing system may fail to function properly.
Consequence: Windshield wipers or a washing system that fails to function as intended can reduce visibility, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the wiper motor as necessary, free of charge. Owner notification letters were mailed August 11, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26C32. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on July 2, 2026.
Notes:
4. Electrical system
What's wrong, in plain English: Wiring, modules, batteries. Short circuits can cause stalls or fires. The engine compartment wiring harness ground connections may fracture and result in a loss of drive power, or a loss of function in the windshield washing system, headlights, air conditioning, or engine cooling fan. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 108, "Lamps, Reflective Devices, and Associated Equipment," and 104, "Windshield Wipi…
What could happen: A loss of driver power increases the risk of a crash. In addition, a loss of headlight function or windshield washing system function can reduce visibility, increasing the risk of a crash.
The fix: Dealers will replace the engine compartment wiring harness ground terminals, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 5, 2026. Additional letters will be sent once the remedy is available, anticipated in March 2027. Owners may contact Ford customer service at 1-866-43…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2026 MUSTANG MACH-E BEV BEV.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 26V547000 (manufacturer code 26C40).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ELECTRICAL SYSTEM:WIRING
Summary: Ford Motor Company (Ford) is recalling certain 2024-2026 Mustang vehicles. The engine compartment wiring harness ground connections may fracture and result in a loss of drive power, or a loss of function in the windshield washing system, headlights, air conditioning, or engine cooling fan. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 108, "Lamps, Reflective Devices, and Associated Equipment," and 104, "Windshield Wiping and Washing Systems."
Consequence: A loss of driver power increases the risk of a crash. In addition, a loss of headlight function or windshield washing system function can reduce visibility, increasing the risk of a crash.
Remedy: Dealers will replace the engine compartment wiring harness ground terminals, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 5, 2026. Additional letters will be sent once the remedy is available, anticipated in March 2027. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26C40. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on August 28, 2026.
Notes:
5. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. The engine piston domes may have been manufactured incorrectly, which can result in piston dome failure and lead to a loss of drive power.
What could happen: An unexpected loss of drive power increases the risk of a crash.
The fix: Dealers will inspect the engine pistons and replace the engine long block, if necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 3, 2026. Additional letters will be sent once the remedy is available, anticipated in December 2026. Owners may contact Ford customer serv…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2026 MUSTANG MACH-E BEV BEV.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 26V548000 (manufacturer code 26S61).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL
Summary: Ford Motor Company (Ford) is recalling certain 2026 Explorer, Bronco, Bronco Sport, Mustang, and Ranger vehicles. The engine piston domes may have been manufactured incorrectly, which can result in piston dome failure and lead to a loss of drive power.
Consequence: An unexpected loss of drive power increases the risk of a crash.
Remedy: Dealers will inspect the engine pistons and replace the engine long block, if necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 3, 2026. Additional letters will be sent once the remedy is available, anticipated in December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S61. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on August 28, 2026.
Notes:
Useful for owners
- OBD2 code reader — see what the car's computer is reporting
- Compact car fire extinguisher
- Portable jump starter
- 2026 Ford Mustang Mach-E Bev Bev owner's manual
Owner complaints filed with NHTSA
Most complained-about parts: Electrical system (1), Lights (1), Brakes (1).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (1)
06/15/2026 · Electrical system
Description On your vehicle, the integrated park module ipm may not properly engage the park pawl, preventing the vehicle from locking into park when park p is selected. If this condition occurs, a wrench light and shift system fault message will be displayed in the instrument panel cluster. Additionally, the vehicles electronic parking brake epb will auto…