2016 Ford Mustang recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.
5 safety recalls, most serious first
1. Seat belts
What's wrong, in plain English: Seat belts may not hold you in a crash. The front and rear seat belts and child seat tether anchors may have been damaged in shipping from the supplier to the vehicle assembly plant and may not adequately restrain the occupant in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 225, "Child restraint anchorage systems."
What could happen: If the restraint components do not function as intended, the occupants may not be properly restrained in the event of a crash, increasing their risk of injury.
The fix: Ford will notify owners, and dealers will replace the front and rear seat belt assemblies and the child seat tether anchors, free of charge. The recall began on December 18, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15C13.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2016 MUSTANG.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 15V707000 (manufacturer code 15C13).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: SEAT BELTS
Summary: Ford Motor Company (Ford) is recalling certain model year 2016 Ford Mustang vehicles manufactured September 26, 2015, to October 1, 2015. The front and rear seat belts and child seat tether anchors may have been damaged in shipping from the supplier to the vehicle assembly plant and may not adequately restrain the occupant in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 225, "Child restraint anchorage systems."
Consequence: If the restraint components do not function as intended, the occupants may not be properly restrained in the event of a crash, increasing their risk of injury.
Remedy: Ford will notify owners, and dealers will replace the front and rear seat belt assemblies and the child seat tether anchors, free of charge. The recall began on December 18, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15C13.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2. Engine
What's wrong, in plain English: Engine problems range from stalling to fire. A hose may separate from the engine oil cooler tube assembly causing an oil leak.
What could happen: A sudden loss of engine oil may cause engine failure, increasing the risk of a crash. Additionally, an oil leak, in the presence of an ignition source, increases the risk of a fire.
The fix: Ford will notify owners, and dealers will replace the engine oil cooler tube assembly, free of charge. The recall began on March 23, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S40.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2016 MUSTANG.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 16V779000 (manufacturer code 16S40).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
Summary: Ford Motor Company (Ford) is recalling certain model year 2015-2017 Mustang vehicles manufactured February 24, 2015, to August 30, 2016. A hose may separate from the engine oil cooler tube assembly causing an oil leak.
Consequence: A sudden loss of engine oil may cause engine failure, increasing the risk of a crash. Additionally, an oil leak, in the presence of an ignition source, increases the risk of a fire.
Remedy: Ford will notify owners, and dealers will replace the engine oil cooler tube assembly, free of charge. The recall began on March 23, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S40.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
3. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. The rearview camera wiring may be loose or damaged, which can result in a blank or distorted image.
What could happen: A rearview camera that displays a blank or distorted image can reduce the driver's rear view, increasing the risk of a crash.
The fix: Dealers will inspect and repair the decklid wiring harness and/or replace the rearview camera, as necessary, free of charge. Owner notification letters were mailed December 23, 2022 and June 26, 2023. Remedy parts are expected to become available in the 4th Quarter of 2022. Owners may contact Ford customer service…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2016 MUSTANG.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 22V082000 (manufacturer code 22S06).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Summary: Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. The rearview camera wiring may be loose or damaged, which can result in a blank or distorted image.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will inspect and repair the decklid wiring harness and/or replace the rearview camera, as necessary, free of charge. Owner notification letters were mailed December 23, 2022 and June 26, 2023. Remedy parts are expected to become available in the 4th Quarter of 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
4. Backup camera
What's wrong, in plain English: The rear camera may not show an image when reversing. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
What could happen: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
The fix: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2016 MUSTANG.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 25V572000 (manufacturer code 25S89).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Summary: Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
Consequence: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.
Notes:
5. Seat belts
What's wrong, in plain English: Seat belts may not hold you in a crash. Water and road salt may corrode the front seat belt anchor pretensioner cables.
What could happen: A corroded cable can break, preventing the seat belt from properly restraining an occupant, and increasing the risk of injury during a crash.
The fix: Dealers will inspect and replace both front seat belt anchor pretensioner assemblies, as necessary. In addition, dealers will remove sections of the carpet and underlayment that contact the cables. Dealers will also inspect the A-pillar sealing patches, and as necessary, install A-pillar body plugs, and/or inspect and…
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2016 MUSTANG.
- Book a repair at any authorized Ford dealer. Quote NHTSA campaign 25V614000 (manufacturer code 25S92).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-866-436-7332.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: SEAT BELTS:PRETENSIONER
Summary: Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. Water and road salt may corrode the front seat belt anchor pretensioner cables.
Consequence: A corroded cable can break, preventing the seat belt from properly restraining an occupant, and increasing the risk of injury during a crash.
Remedy: Dealers will inspect and replace both front seat belt anchor pretensioner assemblies, as necessary. In addition, dealers will remove sections of the carpet and underlayment that contact the cables. Dealers will also inspect the A-pillar sealing patches, and as necessary, install A-pillar body plugs, and/or inspect and replace the front outboard seat bolts. Repairs will be performed free of charge. Interim letters, notifying owners of the safety risk, were mailed October 20, 2025. Additional letters will be sent once the final remedy is available, anticipated December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S92. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov September 17, 2025.
Notes:
Useful for owners
- OBD2 code reader — see what the car's computer is reporting
- Compact car fire extinguisher
- 2016 Ford Mustang owner's manual
Owner complaints filed with NHTSA
Most complained-about parts: Engine (83), Electrical system (73), Unknown Or Other (70), Backup camera (52), Transmission / drivetrain (29).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
10/14/2026 · Unknown Or Other
The clutch pedal assembly weld has failed at the pivot point. This is a well known issue in the community and no fix has been made by Ford. The car could NOT shift or move while in the middle of an intersection.
09/29/2026 · Electrical system · fire
A new Walmart-brand EverStart Plus 96R, 590 CCA automotive battery was purchased on August 4, 2026, and installed in a 2016 Ford Mustang Convertible. On the evening of September 26, 2026, my family and I drove the Mustang and returned home at approximately 11:00 p.m. The vehicle operated normally. There were no warning signs, electrical problems, overheati…
09/18/2026 · Latches / locks
The contact owned a 2016 Ford Mustang. The contact stated that while driving at highway speeds, the driver's side door independently opened. The failure caused severe wind noise to enter the vehicle, and the door ajar warning light illuminated. The vehicle was taken to an authorized dealer, where technicians confirmed that the door latch mechanism had faile…
09/17/2026 · Fuel system
On or about June 24, 2026, the CHECK ENGINE light came on. Since I was near the local Ford Dealership, I stopped there. The car was evaluated the next day. I was told the the gas tank assembly and pipe had to be replaced. The repair was almost $4000. My car only as 63,117 miles on it. Before the problem was diagnosed, I was getting lousy gas mileage a…
09/04/2026 · Unknown Or Other
When reaching 60+ mph the passenger door will unlatch and give me the open passenger door notification on the dash. It doesn’t shoot up, but rather barely comes open.
09/03/2026 · Engine
Brought the car in for service. The tech called me back and said the engine was blown. Condensation in cylinder 3. This was due to the cylinder walls being engineered to small. Which caused a leak in the coolant jacket. I paid out of pocket nearly $10,000 to have it replaced because the third party warranty that I had purchased declined my coverage to fi…
08/20/2026 · Electrical system
This complaint is a formal notification of a Recall Remedy Failure regarding NHTSA Campaign 22V082000 / 25V572000 (Rearview Camera Wiring Harness / Camera Replacement). My vehicle was brought to an authorized Ford dealership on 07/22/2026 to complete the recall remedy. Following the service, the backup camera functionality has completely degraded and is now…
08/20/2026 · Engine
See attached document for complaint