2013 Mazda Mazda3 recalls & complaints
Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.
1 safety recall, most serious first
1. Body / structure
What's wrong, in plain English: Body panels, frame, doors, hood, trunk or latches. Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the l…
What could happen: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
The fix: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
What to do
- Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2013 MAZDA3.
- Book a repair at any authorized Mazda dealer. Quote NHTSA campaign 16V644000 (manufacturer code 9916H).
- The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
- Manufacturer hotline: 1-800-222-5500.
- Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA
Component: STRUCTURE:BODY:HATCHBACK/LIFTGATE
Summary: Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
Consequence: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Useful for owners
- OBD2 code reader — see what the car's computer is reporting
- Compact car fire extinguisher
- 2013 Mazda Mazda3 owner's manual
Owner complaints filed with NHTSA
Most complained-about parts: Lights (36), Electrical system (32), Transmission / drivetrain (18), Brakes (15), Body / structure (11).
Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.
Read recent complaints (8)
05/01/2025 · Brakes
The Brake Pedal consistently malfunctions, even after the replacement of the master cylinder (by independent service center). The master cylinder does not hold pressure due to a faulty ABS control unit (which, when Mazda was contacted, said that part was on backorder until September). If the manufacturer knows this is an issue and can't supply the part due…
02/14/2024 · Electrical system
There seems to be a lot of people who own 2012 and 2013 Mazda 3 Sedans (with SKYACTIV-G 2.0L and Halogen Type Headlights) that are dealing with the same issue I am dealing with myself. I have just purchased a used 2013 Mazda 3 with Skyactive Technology and I noticed that when I was braking the headlights would pulse on and off and would continue while I…
11/26/2023 · Transmission / drivetrain
Transmission Control Module malfunction. The AT light came on and the car made a jerking motion and a clunking noise. It lost power and would not shift which is very dangerous in moving traffic. It put me at risk for getting hit by another vehicle not expecting the abrupt change in speed by my vehicle. The check engine light is now lit up. There were no war…
08/24/2023 · Body / structure
The contact owns a 2013 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 16V644000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted, and the contact was informed that the part for the recall repair was not yet available. The manufacturer was made aware of the issue. The cont…
08/07/2023 · Seat belts
All my seatbuckels are tearing. I thought it could of been my dog, but I a certain I did not give up my seat or let him drive. My driver side is also tearing. I noticed the buckle catching when securing it, and now it has moved past snag and had a quarter inch tear that it catches on. The buckle is not wide enough for the belt. The belt is no longer able to…
06/10/2023 · Fuel system
After filing up the gas tank, there is a strong smell of fuel coming from the car. It remains strong until the tank is run down to about 3/4. Gas can be seen dripping down the tank under the car. Gas drips are clearly visible on the ground. This has been an ongoing problem for approximately two years.
02/16/2023 · Steering
Steering becomes unpredictable and stiff accompanied by surging and loss of power. Check engine light comes on. Code P0882
01/29/2023 · Electrical system
ABS Module suddenly start failing causing brake sinks down. Almost crashed because of it. It appears to be a very common issue but Mazda still does not recall these ABS modules made by Ford/ATE. Also, it does not show any ABS warning light, which might be why not many people have called on this as they probably thought it was normal. There is all sort of co…