RecallPlainVehicle recalls, explained in plain English

2018 Jeep Wrangler recalls & complaints

13 high-risk recalls and 1827 owner complaints. Check every recall is completed before buying.
14recalls
13high risk
0stop-driving
1827complaints

Source: NHTSA, updated daily. Last checked 2026-10-18. Recalls apply to specific VINs — run your VIN to confirm.

14 safety recalls, most serious first

High risk Campaign 19V680000 · announced 26/09/2019 (5 years ago)

1. Seat belts

What's wrong, in plain English: Seat belts may not hold you in a crash. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

What could happen: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.

The fix: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403.…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 19V680000 (manufacturer code VA6).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: SEAT BELTS:FRONT:ANCHORAGE
Summary: Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
Consequence: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V675000 · announced 28/09/2018 (6 years ago)

2. Body / structure

What's wrong, in plain English: Body panels, frame, doors, hood, trunk or latches. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

What could happen: An unexpected reduction in steering ability, can increase the risk of a crash.

The fix: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V675000 (manufacturer code UA5).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STRUCTURE:FRAME AND MEMBERS
Summary: Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.
Consequence: An unexpected reduction in steering ability, can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V231000 · announced 12/04/2018 (7 years ago)

3. Body / structure

What's wrong, in plain English: Body panels, frame, doors, hood, trunk or latches. The rear under body ladder rail may corrode, possibly reducing the strength of the rear floor pan and causing the left rear seat mount to become loose.

What could happen: If the floor pan strength is reduced and/or the rear seat mount becomes loose, the rear seat may detach in a crash, increasing the risk of injury.

The fix: Chrysler will notify owners, and dealers will inspect and, as necessary, coat the interior and exterior of the driver's side rear underbody ladder rail with three-part rust protection. The recall began September 11, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this reca…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V231000 (manufacturer code U27).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STRUCTURE:FRAME AND MEMBERS
Summary: Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The rear under body ladder rail may corrode, possibly reducing the strength of the rear floor pan and causing the left rear seat mount to become loose.
Consequence: If the floor pan strength is reduced and/or the rear seat mount becomes loose, the rear seat may detach in a crash, increasing the risk of injury.
Remedy: Chrysler will notify owners, and dealers will inspect and, as necessary, coat the interior and exterior of the driver's side rear underbody ladder rail with three-part rust protection. The recall began September 11, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V280000 · announced 01/05/2018 (8 years ago)

4. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. An incorrect transmission park lock rod may have been installed in the transmission.

What could happen: If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.

The fix: Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U43.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V280000 (manufacturer code U43).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: POWER TRAIN:AUTOMATIC TRANSMISSION
Summary: Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.
Consequence: If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U43.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V332000 · announced 17/05/2018 (7 years ago)

5. Electrical system

What's wrong, in plain English: Wiring, modules, batteries. Short circuits can cause stalls or fires. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed…

What could happen: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

The fix: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V332000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: ELECTRICAL SYSTEM:WIRING
Summary: Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Consequence: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 19V320000 · announced 23/04/2019 (5 years ago)

6. Equipment — fix not yet available

What's wrong, in plain English: A part or accessory supplied with the vehicle. The top cover of the roof top tent may crack or break, possibly resulting in the cover detaching from the vehicle while moving.

What could happen: If the roof top tent cover detaches from the vehicle while moving, it can create a road hazard, increasing the risk of a crash.

The fix: The remedy for this recall is still under development. The recall began May 9, 2019. Owners may contact American Fastbacks customer service at 1-844-533-7997 extension 301. Note: Vehicles in this recall are also included in recall 19V-190.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. The fix is not available yet. Register your contact details with the dealer so they call you when parts arrive.
  3. Ask the dealer to confirm the repair is free of charge — safety recall repairs are free by US law.
  4. Manufacturer hotline: 1-844-533-7997.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: EQUIPMENT
Summary: Erwin Hymer Group USA LP dba American Fastbacks (EHGUSA-AF) is recalling certain 2018 Jeep Wrangler vehicles sold with a roof top tent installed. The top cover of the roof top tent may crack or break, possibly resulting in the cover detaching from the vehicle while moving.
Consequence: If the roof top tent cover detaches from the vehicle while moving, it can create a road hazard, increasing the risk of a crash.
Remedy: The remedy for this recall is still under development. The recall began May 9, 2019. Owners may contact American Fastbacks customer service at 1-844-533-7997 extension 301. Note: Vehicles in this recall are also included in recall 19V-190.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 21V028000 · announced 28/01/2021 (3 years ago)

7. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The clutch pressure plate may overheat and fracture.

What could happen: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were m…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 21V028000.
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: POWER TRAIN:CLUTCH ASSEMBLY
Summary: Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 20V124000 · announced 03/03/2020 (6 years ago)

8. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The clutch pressure plate may overheat and fracture.

What could happen: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 20V124000 (manufacturer code W12).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: POWER TRAIN:CLUTCH ASSEMBLY
Summary: Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V343000 · announced 25/05/2018 (6 years ago)

9. Steering

What's wrong, in plain English: If steering fails you can lose control of the car. The intermediate steering shaft may not have been properly welded causing a split where the external spline is formed.

What could happen: If the weld seam splits, the steering wheel may lose center positioning causing a loss of steering responsiveness and increasing the risk of a crash.

The fix: Chrysler will notify owners, and dealers will inspect and, as necessary, replace the intermediate steering shaft, free of charge. The recall began June 21, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U48.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V343000 (manufacturer code U48).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: STEERING
Summary: Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The intermediate steering shaft may not have been properly welded causing a split where the external spline is formed.
Consequence: If the weld seam splits, the steering wheel may lose center positioning causing a loss of steering responsiveness and increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect and, as necessary, replace the intermediate steering shaft, free of charge. The recall began June 21, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U48.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 18V524000 · announced 09/08/2018 (8 years ago)

10. Electrical system

What's wrong, in plain English: Wiring, modules, batteries. Short circuits can cause stalls or fires. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.

What could happen: A vehicle stall can increase the risk of a crash.

The fix: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V524000 (manufacturer code U87).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
Summary: Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
Consequence: A vehicle stall can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

High risk Campaign 23V116000 · announced 23/02/2023 (1 years ago)

11. Transmission / drivetrain

What's wrong, in plain English: The parts that send engine power to the wheels. Failure can mean a sudden loss of power or the car rolling away. The clutch pressure plate may overheat and fracture.

What could happen: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

The fix: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces pr…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 23V116000 (manufacturer code 19A).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: POWER TRAIN:CLUTCH ASSEMBLY
Summary: Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

High risk Campaign 24V652000 · announced 05/09/2024 (2 years ago)

12. Electrical system

What's wrong, in plain English: Wiring, modules, batteries. Short circuits can cause stalls or fires. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

What could happen: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

The fix: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 24V652000 (manufacturer code 30B).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Summary: Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
Consequence: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.
Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

High risk Campaign 24V676000 · announced 12/09/2024 (1 years ago)

13. Backup camera

What's wrong, in plain English: The rear camera may not show an image when reversing. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."

What could happen: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

The fix: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-80…

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 24V676000 (manufacturer code 77B).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Summary: Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.
Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Moderate Campaign 18V786000 · announced 08/11/2018 (8 years ago)

14. Latches / locks

What's wrong, in plain English: Doors, hood or trunk may open unexpectedly. The right rear passenger door latch may not be in the correct location, possibly preventing the door from latching properly.

What could happen: If the right rear passenger door opens unexpectedly, it can increase the risk of injury.

The fix: Chrysler will notify owners, and dealers will repair the right rear door latch reinforcement, free of charge. The recall begin December 6, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UB6.

What to do

  1. Check whether your car is affected: enter your 17-digit VIN at nhtsa.gov/recalls. A recall covers specific VINs, not every 2018 WRANGLER.
  2. Book a repair at any authorized Jeep dealer. Quote NHTSA campaign 18V786000 (manufacturer code UB6).
  3. The repair is free. By US law, safety recall repairs cost the owner nothing, no matter the car's age or mileage.
  4. Manufacturer hotline: 1-800-853-1403.
  5. Buying this car used? Ask the seller for proof the recall was completed, or run the VIN yourself before paying.
Official wording from NHTSA

Component: LATCHES/LOCKS/LINKAGES:DOORS:LATCH
Summary: Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler four-door vehicles. The right rear passenger door latch may not be in the correct location, possibly preventing the door from latching properly.
Consequence: If the right rear passenger door opens unexpectedly, it can increase the risk of injury.
Remedy: Chrysler will notify owners, and dealers will repair the right rear door latch reinforcement, free of charge. The recall begin December 6, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UB6.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Useful for owners

Links go to Amazon. We may earn a small commission at no cost to you.

Owner complaints filed with NHTSA

1827complaints
22crashes
25fires
13injuries
0deaths

Most complained-about parts: Steering (1117), Suspension (343), Electrical system (268), Unknown Or Other (212), Transmission / drivetrain (177).

Complaints are unverified reports from owners. A pattern (many complaints about the same part) matters more than any single one.

Read recent complaints (8)

10/14/2026 · Brakes
My 2018 Jeep Wrangler Unlimited Rubicon developed an abnormal braking condition in which the vehicle felt as though the brakes were being applied without driver input, particularly when releasing the accelerator pedal. The vehicle experienced noticeable resistance and deceleration consistent with the brakes remaining partially engaged. An authorized Jeep d…

10/14/2026 · Steering
Death wobble dealer states was repaired by a bushing, lakeland Chrysler dodge selling and servicing dealer. They can not duplicate but no one is ever available to road test. Spoke with General manager and was told to trade in not we want to fix

10/13/2026 · Fuel system
The contact’s wife owns a 2018 Jeep Wrangler. The contact’s wife stated that while driving at 25 MPH, the vehicle made an unusual sound. The vehicle was taken to the dealer, where it was diagnosed that the skid plate had failed and needed to be replaced. The manufacturer was made aware of the failure by telephone. The failure mileage was approximately 53,00…

10/04/2026 · Electrical system
The front driver gauge cluster display frequently goes black. It’s done this for a while, but recently the display stays off a lot longer, making the vehicle less safe to drive. There is a recall for other Jeeps that do this, but my 2018 Jeep Wrangler JLU isn’t covered for some reason.

09/28/2026 · Unknown Or Other
Jeep Chrysler is refusing reimbursement of recall expenses incurred due to the recall. The dealership (Cutter Honolulu) arranged alternate transport while the vehicle was being repaired, as per their documentation, but had the customer bear all expenses, contrary to the " at no cost" stipulation of an NHTSA recall order repair

09/28/2026 · Transmission / drivetrain
The contact owns a 2018 Jeep Wrangler. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 23V116000 (Power Train); however, the failure persisted after the recall repair. While driving 15 MPH, the instrument cluster failed to display the gear that the transmission was shifted to. Several unknown warning lights were illu…

09/25/2026 · Steering
My 2018 Jeep Wrangler JL has excessive play in the steering and wanders while driving, requiring frequent steering corrections to maintain the vehicle's direction, particularly at highway speeds. I have been dealing with the steering issue for over a year. I am concerned that the excessive play and wandering could result in difficulty maintaining control of…

09/24/2026 · Electrical system
I had Recall issue occur on my 2018 Jeep Wrangler JLU #19A Clutch Assembly. The issue also damaged the Transmission as stated possible in the recall. Additionally the dealership reported that recall required replacement of the cluster (Instrument cluster with all gauges). This was all done. However, upon picking up the jeep and driving home, I realized…

Compare

2015 Wrangler2016 Wrangler2017 Wrangler2019 Wrangler2020 Wrangler2021 Wrangler2018 Compass2018 Compass2018 Renegade2018 Renegade2018 Cherokee2018 Cherokee2018 Grand Cherokee2018 Grand Cherokee2018 Grand Cherokee Srt2018 Grand Cherokee Trackhawk